home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Ham Radio 2000
/
Ham Radio 2000.iso
/
ham2000
/
tcp_ip
/
jnos
/
winpop
/
winpop.txt
< prev
Wrap
Text File
|
1994-05-23
|
4KB
|
127 lines
# WinPop Help
The WinPOP application is designed to retrieve messages from
a NOS ( specifically JNOS 110c ) "Front-End" system. The application
uses the WINSOCK interface to the network sub-system and supports
the POP3 protocol for the data exchange.
Configuring POP3.ini
WinPOP is configured through two methods. The first is the startup
configuration which is read in from the pop3.ini file. The second is through
dynamic configuration from the config window. The comments below
apply to both methods. Note: the dynamic configuration is NOT saved to the
pop3.ini file.
POP3.INI:- The format of this file must be strictly adhered to as
my programming is not very good!.
This file consists of line items required to configure the system.
Username
The username required to log onto the POP3 server
Password
The password required to log onto the POP3 server
Hostname
The hostname of the POP3 server. Note: IP addresses are not acceptable
in this field at present.
Mailfile
The file into which collected mail is written ( Full path name )
WinPOP is designed to be straightforward to use. It will either run
interactively or automatically (see Command Line Options).
The retrieval of large amounts of mail can take a significant amount of time
so be prepared for a wait sometimes.
The system was designed to operate over a LAN link. Operation over any other
link type cannot be guaranteed, the effect of network delays has not been
explored.
A tracing facility has been built-in in case of problems.
Command Line Options
Two command line options are available:
-a
Autorun feature. This takes the ini configuration and automatically calls
the server. This is so the program can be run from the startup group to
retrieve mail when windows starts. (It can be run minimised)
-t
Tracing feature. Turns on tracing on startup.
WinSock
WinSock is a library designed to give access to network services from
Window applications via a Berkeley sockets lookalike facility.
This progam ONLY operates via a WinSock interface. You must have a TCP/IP
implementation which provides this facility ( usually winsock.dll etc). It
is not possible to use DLLs not supplied with the underlying software.
The WinSock interface is well documented. Much of the code in this program
has been developed from WinSock examples previously published.
I use FTPs PCTCP product. Although WinSock is supposed to be a universally
defined interface this program cannot be guaranteed to operate with other
implementations.
# Support and Futures
I developed this software because I needed it. I am not a programmer.
The code is probably full of holes and could be written in three lines
of machine code by a Windows guru. I do not intend to enter into long
support issues. The code works for me. I am happy to enter into short
discussions via email.
My address is:
mlines@sni.co.uk
If you are really interested then you are welcome to copies of the source,
please mail for a copy ( free ! ).
I am now developing a NOS Dashboard for Windows. This will present graphically
some of the standard information available from a NOS system. Do not hold
your breath waiting for this software but if I ever have publishable code
then I will make it available.
# Cot-Death
As code is free ( who would pay for it anyway! ) I feel entitled to a
soap-box.
My particular soap box is Cot-Death. I recently lost my son, Adam, to
Cot-Death at the age of eighteen months. This is where an otherwise healthy
child simply dies in their sleep. No medical reason can be found.
Here in the UK, 10 babies a week die through this syndrome. This represents
2 average Jumbo Jets a year crashing with all lost. If this happened there
would be a public outcry. Instead these babies die quietly in their sleep
leaving grieving parents. If 10 teenagers a week collapsed and died at school
the Government would have to act.
We need to fund more research into this problem and raise awareness amongst
the public.
The Foundation for the Study of Infant Deaths has been set up to carry out
this task. They always need financial and physical help.
Please contact me mlines@sni.co.uk for further info.